$156.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store hurricanewindpowercom
() %,

Location: Roanoke, Virginia
Ships to: US,
Item: 251340237049

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Xantrex:Xantrex
Power Source:Solar
C60:C60
MPN:C60

Xantrex C60 Charge Controller 60A, 12/24V Wind Generator, Hydro and Solar Panel Xantrex C Series – C35, C40 & C60 Charge Controllers A Controller for Virtually any DC Charging Source The C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the C40 is joined by two companion controllers, the C35 and C60. All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs. Standard Features Silent Microprocessor Control All C Series controllers (C35, C40 & C60) have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently. PWM Charge Performance C Series controllers (C35, C40 & C60) all use Pulse Width Modulation (PWM) charging profiles which are designed to provide a full charge to your battery while, at the same time, minimize gassing which can shorten battery life. 3-Stage Battery Charging All C Series controllers (C35, C40 & C60) automatically initiate a 3-stage battery charging cycle. Bulk, Absorption, and Float modes are used to ensure that voltage and current settings accurately match the batteries’ actual state of charge. This means fast-as-possible charging and extended battery life. An auto equalize mode can be easily switched off when the controller is used with sealed batteries. C Series controllers are factory set for solar PV battery charging operation. Field Adjustable There are a number of field configurable, user adjustments for C Series controllers. C35 and C60’s can only be set for 12 or 24 VDC operation. The C40 may be configured for 12, 24 or 48 volt systems. Bulk and Float voltage set points are user adjustable which allows use with a wide variety of battery technologies including; flooded lead acid, gel, and absorbed glass mat. In addition, there are manually selectable settings for Nicad batteries. DC Load Controller Mode When used as a load controller, the C Series (C40) will automatically turn a DC load on or off at predetermined battery voltage settings. Both LVD (low voltage disconnect) and LVR (low voltage reconnect) set points are user adjustable. DC Diversion Mode In this mode, all power, which is not used to maintain a full charge on the batteries, is diverted to a load dump such as water or space heaters. Diversion mode is used to regulate micro hydro and wind turbine systems which need a constant load. LED Status Indicator A simple to read, multi-color LED indicates operating status and is standard on all C Series controllers (C35, C40 & C60). UL and cUL Listed C Series controllers are listed by UL to exacting UL 1741 and cUL CSA 22.2 107.1-95 standards. C Series controllers (C35, C40 & C60) are also CE compliant (European countries) and are designed to CTIK standards (Australia). Their current ratings are “real world” and do not have to be derated to comply with USA NEC 125% overcurrent requirements. LCD Digital Display (Optional) CM, CMR/50, CMR/100 -A back-lit meter which continuously displays: battery voltage, DC amperage, cumulative amp hours and amp hours since last reset. CM mounts on front of C Series, C35, C40 and C60, charge controllers. The remote meters CMR/50 and CMR/100 use simple telephone type plug-in connectors. 50 ft. (15 m) or 100 ft. (30 m) cable included. If used with a wind turbine, this will only measure voltage. Temperature Compensation BTS/15 or BTS/35 Monitors battery temperature and adjusts charging voltage for maximum performance. A 15 ft. (4.5 m) or 35 ft. (11 m) cable with standard telephone type connectors is included. Warranty Two years workmanship and materials. Specifications Model C35 C40 C60 Voltage Configurations 12 VDC 24 VDC 12 VDC 24 VDC 48 VDC 12 VDC 24 VDC Maximum PV Array Open Circuit 55 VDC 55 VDC 125 VDC 125 VDC 125 VDC 55 VDC 55 VDC Charging/Load Current @ 25 °C 35 amps DC continuous 40 amps DC continuous 60 amps DC Continuous Recommended Breaker Size With Recommended Wire Size in Conduit 60 amps DC, #6 AWG 60 amps DC, #6 AWG 60 amps DC (100% continuous duty cycle), #6 AWG (90 °C rated) General Specifications Maximum Peak Current85 amps intermittently-electronically protectedMaximum Voltage Drop 0.30 volts -charge control mode Total Current Consumption While operating – 15 ma (typical), at idle – 3 ma (tare) Charge Regulation Method Solid state, 3-stage (Bulk, Absorption and Float) Pulse Width Modulation (PWM). Regulation Adjustment Settings Charge Control Mode Setup for: Lead Acid Battery 12 Volt Configuration: Float 12.5 – 14.5 VDC Bulk 13.0 – 15.0 VDC EQ +1 VDC above Bulk 24 Volt Configuration: Float 25.0 – 29.0 VDC Bulk 26.0 – 30.0 VDC EQ +2 VDC above Bulk 48 Volt Configuration: Float 50.0 – 58.0 VDC Bulk 52.0 – 60.0 VDC EQ +4 VDC above Bulk NiCad Type Battery (VDC above adjustment setting) Float or Bulk (add 2 VDC) Float or Bulk (add 4 VDC) Float or Bulk (add 8 VDC) Load Control Mode Low Voltage Reconnect (LVR) – Subtract 1 V (for 12 VDC systems), 2V (for 24 VDC systems), and 4 V (for 48 VDC systems) from the Bulk setting. Low Voltage Disconnect (LVD) – Subtract 2 V (for 12 VDC systems), 4 V (for 24 VDC systems), and 8V (for 48 VDC systems) from Float setting. Standard Features Status Indicator Multicolor LED indicates the operating/battery voltage status Low Voltage disconnect (Load Control Mode) User selectable manual or automatic reconnection – includes warning flash before disconnect and provides a “grace” period. Equalization Charge (Charge Control Mode) User selectable manual or automatic equalization (every 30 days) Short Circuit Protection Fully electronically protected with auto-reset Field Adjustable Control Setpoints (test points provided for high accruacy) Two user adjustable voltage setpoints for control of loads or charging sources (settings retained if battery is disconnected) Options LCD Meter Panel (CM, CMR/25 CMR/50, CMR/100) Back-lit, 2-line, 32 character, alpha numeric liquid crystal display panel for remote (CMR/XX) or front mounting (CM) on the C Series controller. CMR/25 includes 25′ (7.5 m) of cable. CMR/50 includes 50′ (15 m) of cable, CMR/100 includes 100′ (30 m) of cable. Displays: battery voltage, DC amperage, cumulative amp hours, amp hours since last reset. External Battery Temperature Sensor (BTS/15, BTS/35) Provides automatic adjustment of the charge control setpoints to the battery temperature. BTS/15 is supplied with 15′ (4.5 m) of cable, BTS/35 cable length is 35′ (11 m) Physical Enclosure Type Indoor, ventilated, powder-coated steel with 3/4″ and 1″ knockouts Specified Temperature Range 32 to 104 °F (0 to +40 °C) Allowed Temperature Range -67 to 167 °F (-55 to +75 °C) Altitude Limit (operating) 15,000 feet (5,000 meters) Altitude Limit (non-operating) 50,000 feet (16,000 meters) Dimensions (H x W x D) C35: 8″ x 5″ x 2.5″ (20.3 cm x 12.7 cm x 6.35 cm) C40, C60: 10″ x 5″ x 2.5″ (25.4 cm x 12.7 cm x 6.35 cm) Mounting Vertical Wall Mount Weight (Controller only) C35: 2.5 lbs (1.2 kg), C40: 3.0 lbs (1.4 kg), C60: 3.0 lbs (1.4 kg) Weight (Shipping) C35: 3.0 lbs (1.4 kg), C40: 3.5 lbs (1.6 kg), C60: 3.5 lbs (1.6 kg) Certifications UL Listed to UL 1741 and CSA 22.2 107.1-95. CE Compliant, Designed to CTIK Standards. Warranty All C35, C40 and C60 controllers are warrantied for two years against defects in workmanship and materials. Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier – USAUP TO 50% DISCOUNTSTOP BRANDSPaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. See our other itemsThank you for visiting our Ebay store!Trace / Xantrex Auction for C60 Model only other models discussed for line comparison of PWM / Diversion load controllerShown with optional Meter see other auctions Xantrex C Series – C35, C40 & C60 Charge Controllers A Controller for Virtually any DC Charging Source The C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the C40 is joined by two companion controllers, the C35 and C60. All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs. Standard FeaturesSilent Microprocessor Control All C Series controllers (C35, C40 & C60) have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently. PWM Charge Performance C Series controllers (C35, C40 & C60) all use Pulse Width Modulation (PWM) charging profiles which are designed to provide a full charge to your battery while, at the same time, minimize gassing which can shorten battery life. 3-Stage Battery Charging All C Series controllers (C35, C40 & C60) automatically initiate a 3-stage battery charging cycle. Bulk, Absorption, and Float modes are used to ensure that voltage and current settings accurately match the batteries’ actual state of charge. This means fast-as-possible charging and extended battery life. An auto equalize mode can be easily switched off when the controller is used with sealed batteries. C Series controllers are factory set for solar PV battery charging operation. Field Adjustable There are a number of field configurable, user adjustments for C Series controllers. C35 and C60’s can only be set for 12 or 24 VDC operation. The C40 may be configured for 12, 24 or 48 volt systems. Bulk and Float voltage set points are user adjustable which allows use with a wide variety of battery technologies including; flooded lead acid, gel, and absorbed glass mat. In addition, there are manually selectable settings for Nicad batteries. DC Load Controller Mode When used as a load controller, the C Series (C40) will automatically turn a DC load on or off at predetermined battery voltage settings. Both LVD (low voltage disconnect) and LVR (low voltage reconnect) set points are user adjustable. DC Diversion Mode In this mode, all power, which is not used to maintain a full charge on the batteries, is diverted to a load dump such as water or space heaters. Diversion mode is used to regulate microhydro and wind turbine systems which need a constant load. LED Status Indicator A simple to read, multi-color LED indicates operating status and is standard on all C Series controllers (C35, C40 & C60). UL and cUL Listed C Series controllers are listed by UL to exacting UL 1741 and cUL CSA 22.2 107.1-95 standards. C Series controllers (C35, C40 & C60) are also CE compliant (European countries) and are designed to CTIK standards (Australia). Their current ratings are “real world” and do not have to be derated to comply with USA NEC 125% overcurrent requirements. LCD Digital Display (Optional) CM, CMR/50, CMR/100 -A back-lit meter which continuously displays: battery voltage, DC amperage, cumulative amp hours and amp hours since last reset. CM mounts on front of C Series, C35, C40 and C60, charge controllers. The remote meters CMR/50 and CMR/100 use simple telephone type plug-in connectors. 50 ft. (15 m) or 100 ft. (30 m) cable included. If used with a wind turbine, this will only measure voltage. Temperature Compensation BTS/15 or BTS/35 Monitors battery temperature and adjusts charging voltage for maximum performance. A 15 ft. (4.5 m) or 35 ft. (11 m) cable with standard telephone type connectors is included. Warranty Two years workmanship and materials. Specifications Model C35 C40 C60 Voltage Configurations 12 VDC 24 VDC 12 VDC 24 VDC 48 VDC 12 VDC 24 VDC Maximum PV Array Open Circuit 55 VDC 55 VDC 125 VDC 125 VDC 125 VDC 55 VDC 55 VDC Charging/Load Current @ 25 °C 35 amps DC continuous 40 amps DC continuous 60 amps DC Continuous Recommended Breaker Size With Recommended Wire Size in Conduit 60 amps DC, #6 AWG 60 amps DC, #6 AWG 60 amps DC (100% continuous duty cycle), #6 AWG (90 °C rated) General Specifications Maximum Peak Current 85 amps intermittently-electronically protected Maximum Voltage Drop 0.30 volts -charge control mode Total Current Consumption While operating – 15 ma (typical), at idle – 3 ma (tare) Charge Regulation Method Solid state, 3-stage (Bulk, Absorption and Float) Pulse Width Modulation (PWM). Regulation Adjustment Settings Charge Control Mode Setup for: Lead Acid Battery 12 Volt Configuration: Float 12.5 – 14.5 VDC Bulk 13.0 – 15.0 VDC EQ +1 VDC above Bulk 24 Volt Configuration: Float 25.0 – 29.0 VDC Bulk 26.0 – 30.0 VDC EQ +2 VDC above Bulk 48 Volt Configuration: Float 50.0 – 58.0 VDC Bulk 52.0 – 60.0 VDC EQ +4 VDC above Bulk NiCad Type Battery (VDC above adjustment setting) Float or Bulk (add 2 VDC) Float or Bulk (add 4 VDC) Float or Bulk (add 8 VDC) Load Control Mode Low Voltage Reconnect (LVR) – Subtract 1 V (for 12 VDC systems), 2V (for 24 VDC systems), and 4 V (for 48 VDC systems) from the Bulk setting. Low Voltage Disconnect (LVD) – Subtract 2 V (for 12 VDC systems), 4 V (for 24 VDC systems), and 8V (for 48 VDC systems) from Float setting. Standard Features Status Indicator Multicolor LED indicates the operating/battery voltage status Low Voltage disconnect (Load Control Mode) User selectable manual or automatic reconnection – includes warning flash before disconnect and provides a “grace” period. Equalization Charge (Charge Control Mode) User selectable manual or automatic equalization (every 30 days) Short Circuit Protection Fully electronically protected with auto-reset Field Adjustable Control Setpoints (test points provided for high accruacy) Two user adjustable voltage setpoints for control of loads or charging sources (settings retained if battery is disconnected) Options LCD Meter Panel (CM, CMR/25 CMR/50, CMR/100) Back-lit, 2-line, 32 character, alpha numeric liquid crystal display panel for remote (CMR/XX) or front mounting (CM) on the C Series controller. CMR/25 includes 25′ (7.5 m) of cable. CMR/50 includes 50′ (15 m) of cable, CMR/100 includes 100′ (30 m) of cable. Displays: battery voltage, DC amperage, cumulative amp hours, amp hours since last reset. External Battery Temperature Sensor (BTS/15, BTS/35) Provides automatic adjustmentt of the charge control setpoints to the battery temperature. BTS/15 is supplied with 15′ (4.5 m) of cable, BTS/35 cable length is 35′ (11 m) Physical Enclosure Type Indoor, ventilated, powder-coated steel with 3/4″ and 1″ knockouts Specified Temperature Range 32 to 104 °F (0 to +40 °C) Allowed Temperature Range -67 to 167 °F (-55 to +75 °C) Altitude Limit (operating) 15,000 feet (5,000 meters) Altitude Limit (non-operating) 50,000 feet (16,000 meters) Dimensions (H x W x D) C35: 8″ x 5″ x 2.5″ (20.3 cm x 12.7 cm x 6.35 cm) C40, C60: 10″ x 5″ x 2.5″ (25.4 cm x 12.7 cm x 6.35 cm) Mounting Vertical Wall Mount Weight (Controller only) C35: 2.5 lbs (1.2 kg), C40: 3.0 lbs (1.4 kg), C60: 3.0 lbs (1.4 kg) Weight (Shipping) C35: 3.0 lbs (1.4 kg), C40: 3.5 lbs (1.6 kg), C60: 3.5 lbs (1.6 kg) Certifications UL Listed to UL 1741 and CSA 22.2 107.1-95. CE Compliant, Designed to CTIK Standards. Warranty All C35, C40 and C60 controllers are warrantied for two years against defects in workmanship and materials. On Oct-22-13 at 17:27:47 PDT, seller added the following information: Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application [FREE! Sellers: Add a FREE map to your listings. FREE!] (http://newage.mystoremaps.com/echo/tagLine?sid=cea073c8-fc6f-494f-9ca5-610e8850a127&tid=1) Xantrex C60 Charge Controller 60A, 12/24V Wind Generator, Hydro and Solar Panel Trace / Xantrex Auction for C60 Model only other models discussed for line comparison of PWM / Diversion load controllerShown with optional Meter see other auctions Xantrex C Series – C35, C40 & C60 Charge Controllers A Controller for Virtually any DC Charging Source The C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the C40 is joined by two companion controllers, the C35 and C60. All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs. Standard FeaturesSilent Microprocessor Control All C Series controllers (C35, C40 & C60) have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently. PWM Charge Performance C Series controllers (C35, C40 & C60) all use Pulse Width Modulation (PWM) charging profiles which are designed to provide a full charge to your battery while, at the same time, minimize gassing which can shorten battery life. 3-Stage Battery Charging All C Series controllers (C35, C40 & C60) automatically initiate a 3-stage battery charging cycle. Bulk, Absorption, and Float modes are used to ensure that voltage and current settings accurately match the batteries’ actual state of charge. This means fast-as-possible charging and extended battery life. An auto equalize mode can be easily switched off when the controller is used with sealed batteries. C Series controllers are factory set for solar PV battery charging operation. Field Adjustable There are a number of field configurable, user adjustments for C Series controllers. C35 and C60’s can only be set for 12 or 24 VDC operation. The C40 may be configured for 12, 24 or 48 volt systems. Bulk and Float voltage set points are user adjustable which allows use with a wide variety of battery technologies including; flooded lead acid, gel, and absorbed glass mat. In addition, there are manually selectable settings for Nicad batteries. DC Load Controller Mode When used as a load controller, the C Series (C40) will automatically turn a DC load on or off at predetermined battery voltage settings. Both LVD (low voltage disconnect) and LVR (low voltage reconnect) set points are user adjustable. DC Diversion Mode In this mode, all power, which is not used to maintain a full charge on the batteries, is diverted to a load dump such as water or space heaters. Diversion mode is used to regulate microhydro and wind turbine systems which need a constant load. LED Status Indicator A simple to read, multi-color LED indicates operating status and is standard on all C Series controllers (C35, C40 & C60). UL and cUL Listed C Series controllers are listed by UL to exacting UL 1741 and cUL CSA 22.2 107.1-95 standards. C Series controllers (C35, C40 & C60) are also CE compliant (European countries) and are designed to CTIK standards (Australia). Their current ratings are “real world” and do not have to be derated to comply with USA NEC 125% overcurrent requirements. LCD Digital Display (Optional) CM, CMR/50, CMR/100 -A back-lit meter which continuously displays: battery voltage, DC amperage, cumulative amp hours and amp hours since last reset. CM mounts on front of C Series, C35, C40 and C60, charge controllers. The remote meters CMR/50 and CMR/100 use simple telephone type plug-in connectors. 50 ft. (15 m) or 100 ft. (30 m) cable included. If used with a wind turbine, this will only measure voltage. Temperature Compensation BTS/15 or BTS/35 Monitors battery temperature and adjusts charging voltage for maximum performance. A 15 ft. (4.5 m) or 35 ft. (11 m) cable with standard telephone type connectors is included. Warranty Two years workmanship and materials. Specifications Model C35 C40 C60 Voltage Configurations 12 VDC 24 VDC 12 VDC 24 VDC 48 VDC 12 VDC 24 VDC Maximum PV Array Open Circuit 55 VDC 55 VDC 125 VDC 125 VDC 125 VDC 55 VDC 55 VDC Charging/Load Current @ 25 °C 35 amps DC continuous 40 amps DC continuous 60 amps DC Continuous Recommended Breaker Size With Recommended Wire Size in Conduit 60 amps DC, #6 AWG 60 amps DC, #6 AWG 60 amps DC (100% continuous duty cycle), #6 AWG (90 °C rated) General Specifications Maximum Peak Current85 amps intermittently-electronically protectedMaximum Voltage Drop 0.30 volts -charge control mode Total Current Consumption While operating – 15 ma (typical), at idle – 3 ma (tare) Charge Regulation Method Solid state, 3-stage (Bulk, Absorption and Float) Pulse Width Modulation (PWM). Regulation Adjustment Settings Charge Control Mode Setup for: Lead Acid Battery 12 Volt Configuration: Float 12.5 – 14.5 VDC Bulk 13.0 – 15.0 VDC EQ +1 VDC above Bulk 24 Volt Configuration: Float 25.0 – 29.0 VDC Bulk 26.0 – 30.0 VDC EQ +2 VDC above Bulk 48 Volt Configuration: Float 50.0 – 58.0 VDC Bulk 52.0 – 60.0 VDC EQ +4 VDC above Bulk NiCad Type Battery (VDC above adjustment setting) Float or Bulk (add 2 VDC) Float or Bulk (add 4 VDC) Float or Bulk (add 8 VDC) Load Control Mode Low Voltage Reconnect (LVR) – Subtract 1 V (for 12 VDC systems), 2V (for 24 VDC systems), and 4 V (for 48 VDC systems) from the Bulk setting. Low Voltage Disconnect (LVD) – Subtract 2 V (for 12 VDC systems), 4 V (for 24 VDC systems), and 8V (for 48 VDC systems) from Float setting. Standard Features Status Indicator Multicolor LED indicates the operating/battery voltage status Low Voltage disconnect (Load Control Mode) User selectable manual or automatic reconnection – includes warning flash before disconnect and provides a “grace” period. Equalization Charge (Charge Control Mode) User selectable manual or automatic equalization (every 30 days) Short Circuit Protection Fully electronically protected with auto-reset Field Adjustable Control Setpoints (test points provided for high accruacy) Two user adjustable voltage setpoints for control of loads or charging sources (settings retained if battery is disconnected) Options LCD Meter Panel (CM, CMR/25 CMR/50, CMR/100) Back-lit, 2-line, 32 character, alpha numeric liquid crystal display panel for remote (CMR/XX) or front mounting (CM) on the C Series controller. CMR/25 includes 25′ (7.5 m) of cable. CMR/50 includes 50′ (15 m) of cable, CMR/100 includes 100′ (30 m) of cable. Displays: battery voltage, DC amperage, cumulative amp hours, amp hours since last reset. External Battery Temperature Sensor (BTS/15, BTS/35) Provides automatic adjustmentt of the charge control setpoints to the battery temperature. BTS/15 is supplied with 15′ (4.5 m) of cable, BTS/35 cable length is 35′ (11 m) Physical Enclosure Type Indoor, ventilated, powder-coated steel with 3/4″ and 1″ knockouts Specified Temperature Range 32 to 104 °F (0 to +40 °C) Allowed Temperature Range -67 to 167 °F (-55 to +75 °C) Altitude Limit (operating) 15,000 feet (5,000 meters) Altitude Limit (non-operating) 50,000 feet (16,000 meters) Dimensions (H x W x D) C35: 8″ x 5″ x 2.5″ (20.3 cm x 12.7 cm x 6.35 cm) C40, C60: 10″ x 5″ x 2.5″ (25.4 cm x 12.7 cm x 6.35 cm) Mounting Vertical Wall Mount Weight (Controller only) C35: 2.5 lbs (1.2 kg), C40: 3.0 lbs (1.4 kg), C60: 3.0 lbs (1.4 kg) Weight (Shipping) C35: 3.0 lbs (1.4 kg), C40: 3.5 lbs (1.6 kg), C60: 3.5 lbs (1.6 kg) Certifications UL Listed to UL 1741 and CSA 22.2 107.1-95. CE Compliant, Designed to CTIK Standards. Warranty All C35, C40 and C60 controllers are warrantied for two years against defects in workmanship and materials. On Oct-22-13 at 17:27:47 PDT, seller added the following information: Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application FREE! Sellers: Add a FREE map to your listings. FREE! Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier – USAUP TO 50% DISCOUNTSTOP BRANDSSee our other itemsPayment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Thank you for visiting our Ebay store! Trace / Xantrex Auction for C60 Model only other models discussed for line comparison of PWM / Diversion load controllerShown with optional Meter see other auctions Xantrex C Series – C35, C40 & C60 Charge Controllers A Controller for Virtually any DC Charging Source The C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the C40 is joined by two companion controllers, the C35 and C60. All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs. Standard FeaturesSilent Microprocessor Control All C Series controllers (C35, C40 & C60) have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently. PWM Charge Performance C Series controllers (C35, C40 & C60) all use Pulse Width Modulation (PWM) charging profiles which are designed to provide a full charge to your battery while, at the same time, minimize gassing which can shorten battery life. 3-Stage Battery Charging All C Series controllers (C35, C40 & C60) automatically initiate a 3-stage battery charging cycle. Bulk, Absorption, and Float modes are used to ensure that voltage and current settings accurately match the batteries’ actual state of charge. This means fast-as-possible charging and extended battery life. An auto equalize mode can be easily switched off when the controller is used with sealed batteries. C Series controllers are factory set for solar PV battery charging operation. Field Adjustable There are a number of field configurable, user adjustments for C Series controllers. C35 and C60’s can only be set for 12 or 24 VDC operation. The C40 may be configured for 12, 24 or 48 volt systems. Bulk and Float voltage set points are user adjustable which allows use with a wide variety of battery technologies including; flooded lead acid, gel, and absorbed glass mat. In addition, there are manually selectable settings for Nicad batteries. DC Load Controller Mode When used as a load controller, the C Series (C40) will automatically turn a DC load on or off at predetermined battery voltage settings. Both LVD (low voltage disconnect) and LVR (low voltage reconnect) set points are user adjustable. DC Diversion Mode In this mode, all power, which is not used to maintain a full charge on the batteries, is diverted to a load dump such as water or space heaters. Diversion mode is used to regulate microhydro and wind turbine systems which need a constant load. LED Status Indicator A simple to read, multi-color LED indicates operating status and is standard on all C Series controllers (C35, C40 & C60). UL and cUL Listed C Series controllers are listed by UL to exacting UL 1741 and cUL CSA 22.2 107.1-95 standards. C Series controllers (C35, C40 & C60) are also CE compliant (European countries) and are designed to CTIK standards (Australia). Their current ratings are “real world” and do not have to be derated to comply with USA NEC 125% overcurrent requirements. LCD Digital Display (Optional) CM, CMR/50, CMR/100 -A back-lit meter which continuously displays: battery voltage, DC amperage, cumulative amp hours and amp hours since last reset. CM mounts on front of C Series, C35, C40 and C60, charge controllers. The remote meters CMR/50 and CMR/100 use simple telephone type plug-in connectors. 50 ft. (15 m) or 100 ft. (30 m) cable included. If used with a wind turbine, this will only measure voltage. Temperature Compensation BTS/15 or BTS/35 Monitors battery temperature and adjusts charging voltage for maximum performance. A 15 ft. (4.5 m) or 35 ft. (11 m) cable with standard telephone type connectors is included. Warranty Two years workmanship and materials. Specifications Model C35 C40 C60 Voltage Configurations 12 VDC 24 VDC 12 VDC 24 VDC 48 VDC 12 VDC 24 VDC Maximum PV Array Open Circuit 55 VDC 55 VDC 125 VDC 125 VDC 125 VDC 55 VDC 55 VDC Charging/Load Current @ 25 °C 35 amps DC continuous 40 amps DC continuous 60 amps DC Continuous Recommended Breaker Size With Recommended Wire Size in Conduit 60 amps DC, #6 AWG 60 amps DC, #6 AWG 60 amps DC (100% continuous duty cycle), #6 AWG (90 °C rated) General Specifications Maximum Peak Current85 amps intermittently-electronically protectedMaximum Voltage Drop 0.30 volts -charge control mode Total Current Consumption While operating – 15 ma (typical), at idle – 3 ma (tare) Charge Regulation Method Solid state, 3-stage (Bulk, Absorption and Float) Pulse Width Modulation (PWM). Regulation Adjustment Settings Charge Control Mode Setup for: Lead Acid Battery 12 Volt Configuration: Float 12.5 – 14.5 VDC Bulk 13.0 – 15.0 VDC EQ +1 VDC above Bulk 24 Volt Configuration: Float 25.0 – 29.0 VDC Bulk 26.0 – 30.0 VDC EQ +2 VDC above Bulk 48 Volt Configuration: Float 50.0 – 58.0 VDC Bulk 52.0 – 60.0 VDC EQ +4 VDC above Bulk NiCad Type Battery (VDC above adjustment setting) Float or Bulk (add 2 VDC) Float or Bulk (add 4 VDC) Float or Bulk (add 8 VDC) Load Control Mode Low Voltage Reconnect (LVR) – Subtract 1 V (for 12 VDC systems), 2V (for 24 VDC systems), and 4 V (for 48 VDC systems) from the Bulk setting. Low Voltage Disconnect (LVD) – Subtract 2 V (for 12 VDC systems), 4 V (for 24 VDC systems), and 8V (for 48 VDC systems) from Float setting. Standard Features Status Indicator Multicolor LED indicates the operating/battery voltage status Low Voltage disconnect (Load Control Mode) User selectable manual or automatic reconnection – includes warning flash before disconnect and provides a “grace” period. Equalization Charge (Charge Control Mode) User selectable manual or automatic equalization (every 30 days) Short Circuit Protection Fully electronically protected with auto-reset Field Adjustable Control Setpoints (test points provided for high accruacy) Two user adjustable voltage setpoints for control of loads or charging sources (settings retained if battery is disconnected) Options LCD Meter Panel (CM, CMR/25 CMR/50, CMR/100) Back-lit, 2-line, 32 character, alpha numeric liquid crystal display panel for remote (CMR/XX) or front mounting (CM) on the C Series controller. CMR/25 includes 25′ (7.5 m) of cable. CMR/50 includes 50′ (15 m) of cable, CMR/100 includes 100′ (30 m) of cable. Displays: battery voltage, DC amperage, cumulative amp hours, amp hours since last reset. External Battery Temperature Sensor (BTS/15, BTS/35) Provides automatic adjustmentt of the charge control setpoints to the battery temperature. BTS/15 is supplied with 15′ (4.5 m) of cable, BTS/35 cable length is 35′ (11 m) Physical Enclosure Type Indoor, ventilated, powder-coated steel with 3/4″ and 1″ knockouts Specified Temperature Range 32 to 104 °F (0 to +40 °C) Allowed Temperature Range -67 to 167 °F (-55 to +75 °C) Altitude Limit (operating) 15,000 feet (5,000 meters) Altitude Limit (non-operating) 50,000 feet (16,000 meters) Dimensions (H x W x D) C35: 8″ x 5″ x 2.5″ (20.3 cm x 12.7 cm x 6.35 cm) C40, C60: 10″ x 5″ x 2.5″ (25.4 cm x 12.7 cm x 6.35 cm) Mounting Vertical Wall Mount Weight (Controller only) C35: 2.5 lbs (1.2 kg), C40: 3.0 lbs (1.4 kg), C60: 3.0 lbs (1.4 kg) Weight (Shipping) C35: 3.0 lbs (1.4 kg), C40: 3.5 lbs (1.6 kg), C60: 3.5 lbs (1.6 kg) Certifications UL Listed to UL 1741 and CSA 22.2 107.1-95. CE Compliant, Designed to CTIK Standards. Warranty All C35, C40 and C60 controllers are warrantied for two years against defects in workmanship and materials. On Oct-22-13 at 17:27:47 PDT, seller added the following information: Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application FREE! Sellers: Add a FREE map to your listings. FREE!

Frequently Asked Questions About Xantrex C60 Charge Controller 60A, 12/24V Wind Generator, Hydro and Solar Panel in My Website

www.amea-care.gr is the best online shopping platform where you can buy Xantrex C60 Charge Controller 60A, 12/24V Wind Generator, Hydro and Solar Panel from renowned brand(s). www.amea-care.gr delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Xantrex C60 Charge Controller 60A, 12/24V Wind Generator, Hydro and Solar Panel on www.amea-care.gr?

www.amea-care.gr helps you to shop online and delivers Fila to your doorstep. The best-selling Fila on www.amea-care.gr are: Fila Vf9240 Col 0700 Shiny Black Rectangle Eyeglasses Frames 55-14-140 Fila Womens Memory Foam Sneakers Pink Blue Gray White Size 9.5 FILA MB Mens Basketball Shoes Size 11 Egret Gray Blue Yellow Jamal Mashburn Fila Original Fitness Shoes Mens Sz 13 Blue White Red Low Top Sneakers Fila Doublewide Solid Wristbands FILA Axilus 2.5 Energized Purple Tie Dye Tennis Shoes – Womens S 9.5 MSRP – $115 Fila All Terrain Black Men’s Athletic Shoes – 1JM01275-016 Size 10.5 Women’s Fila Disruptor II Premium White/Navy/Red 5FM00002-125 FILA Men’s TERATACH 600 MID Size 10.5 White /Gardenia/ Gum Patent Leather FILA A-High Triple Black Faux Leather Shoes Men Sneakers Fila Forlani Outline Flag Womens White Motorsport Inspired Sneakers Shoes Fila Disruptor Ii Midnight Garden Womens Shoes Fila OakMont TR Trainers 1JM01747-704 Men’s Size 7 NEW without box Fila Men’s Mid-Cut A-High Athletic Sneakers 1CM00540-600 Red Size 13M Fila Grant Hill 2 Sneakers for Men – WhiteBlack -Size 45 FILA MB Mens Basketball Shoes Size 10 Beige Black Orange Blue Jamal Mashburn FILA MB Mens Athletic Basketball Shoes Size 11.5 Black Red Bred Jamal Mashburn Fila Men’s F13 PS Shoes Suede Gray Size 10 Fila Ray Tracer TR 2 Mid Shoes – NEW Mens Size 12 Black / Black – #44881-TOP Men’s T-Shirt-FILA Stacked Logos Retro Sporty Style-100% Cotton-Size S_M_L Fila Grant Hill 3 Woven Mens Shoes Fila Women’s Disruptor II Premium Athletic Sneakers Size 10 FILA BOOTS BLACK MENS ZIP CHASTIZER 1LM00116-001 Fila Volley Zone Pickleball Mens Black Sneakers Athletic Shoes 1PM00596-016 Fila Morales Men’s Size 11 Shoes Black Canvas Low Top Sneakers 1CM01544-013 Men FILA Renno Red Suede White Blue RETRO EDITION Running Lace Up Sneakers 10 Fila Ray TRACER mens Size 11 Athletic Shoes New Fila Disruptor II Animal Women’s Size 7.5 Athletic Fashion Shoes 5XM00806-992 Fila Fazal Basketball Shoes Size 10 M Fila Men’s Black Stackhouse Spaghetti Basketball Sneakers 1BM01871 Mens Fila Original Fitness Classic Retro Casual Athletic Shoes White Navy Red NEW FILA Motorsport Exalade 6 Women’s Black Athletic Shoes Sneakers Size 6.5 FILA Disruptor 2 Premium , Women’s 6, Chunky Leather Sneakers, 100 Triple White Fila Original Fitness Men’s Shoes Black-White 1FM01722-021 Fila Axilus Lace Up Youth Boys Blue Sneakers Casual Shoes 3TM00597-430 Fila Men’s A-High Shoes Sneakers 1CM00540-100 – White/White Fila Suspence Winspeed Athletic Running Shoes Grey Pink Size 7.5 New Size 6Y / Women’s 7.5 FILA F-13 Weather Tech Boots 3SH40121-060 CastleRock Fila Womens 5CM00772-125 White Casual Shoes Sneakers Size 11 Fila Men’s Disruptor II Premium Shoes White/Navy/Red 1FM00139-125 Fila Men’s Black Trazorus 2 Energized Sneaker Shoe Walking Athletic Gym NEW! Fila Impress LL Yellow Athletic Shoe Men 10 FILA Fila Stack 2 MSS23004109 White Blue Silver Fila All Terrain Black Men’s Athletic Shoes – 1SHW0262-002 – Size 11.5 FILA ORIGINAL FITNESS Shoes Women’s US 6.5 EU 37.5 Canary Yellow 5FM00631-732 FILA Womens Sneakers SORE 2 Running Training ATHLETIC Shoes SIZE 9.5 Grey Fila Mb Stitch Mens Shoes NIB – FILA – Women’s Sleek Marble Slide Sandals, Pink & White, 8 Men’s FILA A-Low Classic Casual Comfy Shoe / Triple White / 1CM00551 100 Fila black sneakers memory foam size 9 Men’s Fila Sneakers/Shoes High Top Black Size 12 Basketball Lace up/Hook & Loop Fila Renno X Dragon Ball Super Vegeta Sneakers Fila Heritage Tormo Platform Pink Women’s Shoes Size 7 Sample New Without Box Fila Disruptor II Wedge 5CM01842-014 Womens Black Lifestyle Sneakers Shoes Fila Vulc 13 Marble Mens Shoes Size 8.5 : White/Metallic Gold/White Fila Red Crimson Skyweave Men’s Sneaker, #1CM00356-600, Size 9 Fila Armada Mens Shoes FILA Women’s Disruptor II Premium Pale Banana Sneakers Fila Breakaway 10 Mens Shoes Fila Women’s Renno Sneakers Lemon/Knockout/ Pink Black 5CM01616-710 Size 7.5 M Fila Disruptor II Checker Womens Shoes Size 9 Black/White Checkered Men’s Fila, Chastizer Work Boot 1LM00984-001 Solid Black Leather Mesh Synthetic Fila Men’s Oakmont Tr [1JM01565-865] Sneaker Shoes, 11 M US Fila Oakmont TR Mid Men’s Shoes Ponderosa-Espresso-Black 1JM01276-362 FILA Sneakers Women’s 8 Purple Memory Foam Cool Max Athletic Running Shoes Fila Lombardi Mint Sneakers 10 Women Lace Up Low Top Running Shoes 5RM00366-421 FILA Blue/white Running Athletic Shoes Womens Size 9 1/2 Fila Edgewater 12 PB 1HM00872-467 Mens Blue Synthetic Casual Dress Boots Fila Disruptor II Wedge 5CM01842-013 Womens Black Lifestyle Sneakers Shoes Fila Sandenal Men’s – 1RM02203-117 Fila Sandenal Men’s Shoes Seedpearl-Oxford Tan-Black 1RM01646-201 FILA RAY TRACER TR 2 Sneakers DSMT/BTRR/LEMO -248 New Women’s Sz 5.5 Pink Fila Disruptor 2 Sneakers Premium Shoes Running Mens Fila Grant Hill 2 25th Anniversary Basketball Shoe / Black / 1BM01374 / NEW FILA Mens Size 6.5 Electrove 2 Chunky Sneaker Shoes Orange Black Street FILA Women’s Disruptor II Premium Silver Sneakers Fila Forlani Outline Flag Mens White Motorsport Inspired Sneakers Shoes Fila Windshift 15 Womens Shoes Fila Memory Stir Up 3 size 7 gray/mint women’s running shoes NEW 5RM02131-253 Men Fila Sneakers Navy Blue White Red Size 8 Fila Mens Superstride 4 1RM01889-001 Black Lace Up Sneaker Shoes Size 9.5 Fila Men’s Skele-Toes EZ-SLIDE Barefoot Summer Water Shoes Black Outdoor 8 Med Fila Faux Suede Hightop Sneakers Shoes Athletic Mens Size 9 Black FW00420-003 Fila Mens 1SC60526-030 Black Basketball Shoes Sneakers Size 12 Fila Armada Mens Shoes Fila 1CM01569-019 Fila Renno N Generation Men’s Size 10.5 Black Gray Orange Men’s FILA Renno Sneakers, Pre-Owned, 10 1/2, Minimal Wear, EUC Fila Stackhouse Spaghetti Men’s Shoes Black-Pinecone-Purple 1BM01269-972 Women’s FILA No Show Socks [1BM01873-125] NEW MEN’S FILA STACKHOUSE SPAGHETTI WHITE FILA NAVY FILA RED FM80 FILA~NWOB!!~BLACK LEATHER LACE-UP SLIP RESISTANT MEMORY FOAM SNEAKERS WOM: 11W Men’s Size 9 FILA Oakmont TR S/N 1JM01565-865 Fila Speedserve Energized Tennis Mens White Sneakers Athletic Shoes 1TM01778-10 [1BM00866-125] Mens Fila GRANT HILL 2 [1BM01788-014] Mens Fila STACKHOUSE SPAGHETTI Mens 8.5 – Fila Fast Trek Trail 1JM01662-055 Gray Synthetic Running Hiking Shoes Fila Mens Vulc 13 1SC60526-125 White Basketball Shoes Sneakers Size 8 Fila Corda Lace Up Mens Black Sneakers Casual Shoes 1TM01797-001 Mens FILA Teratach 600 Casual Athletic Work Shoe/ Black Red White / 1BM00872 014 Men’s Fila Original Fitness Casual Shoe 11-F16LT-150 New In Box Size 10.5 Mens Pullover Fleece Hoodie