$18.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store omnimodels
(684821) 99.5%,

Location: United States
Ships to: US,
Item: 395664404868

Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Hangar 9:Hangar 9
MPN:HANU965
Age Level:17 Years & Up

Hangar 9 UltraCote Lite Overview Hangar 9® UltraCote® is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote’s unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F. Key Features High tech polyester covering Unique multi Hangar 9 UltraCote Lite, Transparent White, HANU965 Hangar 9 UltraCote Lite Overview Hangar 9® UltraCote® is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote’s unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F. Key Features High tech polyester covering Unique multi temperature-controlled adhesive shrinkage system Versatile and easy to apply Patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning of the covering on your model. Light weight at .12 oz/sq. ft. Fuel proof to glow fuel, gas, and smoke oil. Water proof as well. Detailed Information   Surface Preparation: The covering job can only be as good as the finish of the surface it’s applied over. In order for the covering to properly adhere to a surface, the surface must first be smooth and clean. Sand the model using a sanding block and progressively finer sandpaper, with the final sanding being done with 320 grit paper. Vacuum away all of the dust, as specks of dust under the covering will leave unsightly bumps. Fill gaps and dents with a high-quality filler. If using light-colored UltraCote® (such as white or yellow), use a tan-colored filler that matches the wood color to prevent the filler from showing through. Pro Tip – Some professional builders “raise the grain” then sand a second time with 320 or 400 grit paper for the ultimate finish. After the model is sanded, use a damp cloth to wipe down the model. Some modelers prefer to use a fine-mist squirt bottle filled with water to dampen the surfaces to be covered. As the surface dries, imbedded wood fibers in the surface will “stand up.” When dry, sand the surfaces again using 320 or 400 grit paper. Raising the grain now and sanding it off will prevent the grain from raising later under the covering, creating a bumpy finish. Vacuum the model thoroughly and avoid touching the model with oily hands.Your model is now ready for covering! Trim Film to Size: Start by covering the bottom of one wing half. Using scissors or sharp hobby knife, cut a piece of UltraCote® a few inches larger than needed to cover the wing. Remove the backing (save for later) and place the covering with the adhesive (dull) side down, centered over the wing. Set the covering iron to the application temperature of 220°F. Pro Tip – If the iron you’re using does not display the actual temperature, here is a tip that will ensure your iron is properly set.Water boils at 212°F. Allow your iron to warm up at a medium setting. When the iron reaches its stabilized temperature, carefully pour a few drops of water on the iron’s surface. Adjust the temperature until the water just begins to boil off. This method is surprisingly accurate and is generally within 10° (of the exact application temperature of 220). Tacking Covering to Spar: Tack the covering to the spar or the high point of the wing, using your iron as shown (an iron sock is highly recommened). Gently pull the covering toward the root and toward the tip, as you work the iron from the center of the spar to the root and tip of the wing. Press gently with the iron, allowing the heat (not pressure) to activate the adhesive and bond the covering to the high point. Ideally, the covering will naturally lay flat against the entire surface with a minimum of wrinkles. Covering a Solid-Sheeted Wing: If covering a solid-sheeted wing, work from the center of the spar outward to the trailing edge and then to the leading edge as shown, using the iron at 220°F. If a wrinkle develops, the covering can be carefully lifted and reapplied. Covering an Open-Structure Wing: If covering an open-structure wing, work from the spar toward the trailing edge, gently sliding the iron (set at 220°) toward the trailing edge with the iron contacting two ribs. Using your iron, adhere the covering to the remaining ribs, working toward the tip and the root. Now complete the open structure leading edge, using the same method. If the leading edge is sheeted, then follow the technique listed above under “Covering a Solid-Sheeted Wing.” Sealing the Edges: With the iron set to 220°F, seal the leading and trailing edges. Using a straight edge and a sharp #11 hobby knife, carefully trim the excess covering from the leading and trailing edge, allowing a minimum of a 1/4″ overlap to wrap around the leading and trailing edge of the wing. Now seal the leading and trailing edges securely with the covering iron. Wing Tip: Depending on the amount of the curvature of the wing tip, high heat (up to 350°F) may be needed to shrink and stretch the covering to eliminate all the wrinkles. Preset the iron to 300°F. Pull and stretch the covering around the wing tip while applying heat with the iron. Remember, UltraCote® can be carefully lifted and repositioned to help eliminate wrinkles. This feature is beneficial, especially when covering sharply curved wing tips. Continue working, pulling, and heating the covering around the tip until the covering is past the center of the tip. It may be necessary to increase the temperature of the iron to achieve greater shrinkage to eliminate all wrinkles. Trim the excess covering using a #11 hobby knife, then reseal the covering on the wing tip . Pro Tip – If sealing the covering in tight areas such as corners or fillets, using the Hangar 9® ProTrim Sealing Tool is very helpful and results in a professional finish. Covering the Top of the Wing: Using the backing from the wing panel that you just covered as a template, cut a piece of UltraCote® to be applied to the top of the wing. Be sure to cut a top panel, making sure that the adhesive is on the correct side. Apply the covering to the top of the wing using the same techniques as described in steps 3 through 6. Be sure that the covering overlaps a minimum of a 1/4″ when trimming the edges and securely seal the edges with the iron. Shrinking the Covering: Now it’s time to shrink the covering. With the iron set to 300°F, apply heat using the same pattern used to apply the covering starting at the spar and working outward. It may be necessary to increase the temperature to 320°F to get rid of stubborn wrinkles. Use the minimum amount of heat necessary to tighten the covering. Pro Tip – Use heat, not pressure, to shrink the covering taught. If pressure is applied, gouges can be pressed into the wood. Let heat, not pressure, do the work. Alternate Method: A heat gun can also be used to shrink the covering. This works particularly well over an open structure. It can also be used over a solid structure if a Hangar 9 Covering Glove™ is used to gently press the covering to the surface after heat is applied. Covering Fuselages and Other Solid Surfaces: The technique for covering fuselages and other simple flat surfaces is identical to covering a solid wing. Start with the bottom, then sides, and finally the top. First, tack the center of the surface down using an iron set to 220°F. Work outward from the center, bonding the covering to the surface. Trim and seal the edges. About 1/4″ or more overlap is recommended when applying the next piece of covering. Shrink the covering, using the same method as described above. Important: Even if you’re experienced in applying other brands of covering, it’s important to read the following instructions. UltraCote® incorporates a unique multi temperature controlled adhesive and shrinkage system that makes achieving professional covering results easy. Multi-Temperature Control System: Understanding the benefits of this system and how to use it will make covering with UltraCote® easy and help to ensure professional results. When using UltraCote®, there are three important temperatures to be aware of. Application Tempature-220°F (100°C): At 220°, the adhesive on UltraCote® becomes active, allowing the covering to be attached to the model.While 220° will fully bond the covering to the model, it is well below the temperature that causes UltraCote® to shrink. This is exactly what’s needed when first attaching covering to the model to prevent the covering from distorting. Pro Tip – Many professional builders mark this temperature on their covering iron with a marker or striping tape for quick reference, as this temperature is used frequently whenever putting on covering. Shrink On-Set Temperature-300°F (134°C) At 300°F, UltraCote® begins to shrink. This is called the Shrink On-Set point. After the covering is attached using an iron set to 220°F, the next step is to shrink the covering. This initial shrinking is done with the iron set at 300°F. Maximum Shrinkage Temperature-350°F (162°C) At 350°F, UltraCote® reaches its maximum shrinking point. Raising the temperature above this point will not cause further shrinkage. The rate of shrinkage is not directly in proportion to the temperature. The chart to the right shows how the majority of the shrinkage rate occurs between 300°F and 330°F. At higher temperatures UltraCote® continues to shrink but at a much slower rate. The smallest amount of shrinkage occurs between 340°F and 350°F. This is helpful to remember when shrinking and tightening covering. Important: Once UltraCote® is shrunk to a specific temperature, a higher temperature must be used to further shrink the covering. For example, if the covering was shrunk using 320°F and wrinkles begin to appear/reappear, it will be necessary to use over 320°F to achieve further shrinkage. Pro Tip – Always use the minimum heat necessary to remove wrinkles when tightening the covering, thus allowing plenty of shrinkage/temperature range remaining if it’s necessary to further shrink the covering. Helpful Hints Multiple Colors: When applying covering with a second color, it’s important that the light color be applied first (under the dark color) to prevent the dark color from showing through. Where colors meet or at the edge of the covering, it is important to not overheat this area (over 300°F), as this will shrink and distort the straight edge. Use a Sealing Iron Sock: A covering sock placed over the iron is highly recommended, as it usually prevents the surface of the iron from scratching. The sock absorbs heat and will require the user to work slower or to turn the heat up 10%. Almost all professional builders use covering socks. Hangar 9 offers one of the best that features muslin on one side to prevent heat damage and soft cotton on the other side for a soft, scratch-free finish. Dryer is Better: Wood naturally absorbs moisture.Wood models actually grow and shrink slightly throughout different seasons. This can be experienced by traveling from the humid Midwest of the United State to the dry deserts of Las Vegas. After a few days in the desert, the model develops covering sags due to model shrinkage. It is recommend that you cover the model in a dry climate if possible. Placing the model in a room with a dehumidifier for several days before covering the model may prevent the covering from sagging due to model shrinkage. Painting: UltraCote® will accept most types of polyurethane, epoxy, and automotive acrylic paints. It’s recommended that the surface be scuffed with 000 steel wool or Scotch® bright pads then thoroughly cleaned with acetone or thinner before painting. Model Dope or butyrate-based paint are not compatible with UltraCote®. Bubbles and Blemishes: Occasionally the intense heat from the sun can cause bubbles and blemishes in the covering, especially when using dark colors. To remove these, heat the bubbled area using a heat gun to expand the air under the covering, causing the bubble to rise. Quickly pop the bubble using a needle then wipe the area using a cold, wet wash cloth. The wet wash cloth rapidly cools the area, allowing the covering to re-adhere. It may take several tries to completely remove the bubble/blemish, but this method works great. Clean Up: The adhesive can be removed from the iron or model using acetone or a mild thinner. Item Condition All items sold by Omni Models are sold as “New: A brand-new, unused, unopened, undamaged item.” We do not sell used, opened, or damaged items. If an item is damaged during shipping, please see our Returns section to arrange a return. Shipping Returns About Omni Models Contact Us Shipping Omni Models ships to all 50 States as well as Puerto Rico, Virgin Islands, and other US protectorates. Unfortunately, we cannot ship to APO/FPO or PO Box addresses at this time. Some restrictions apply based on destination and item size. Our FREE shipping and combined shipping discounts save you money. We offer FREE economy shipping on US orders of $99 or more! Only $4.99 or $9.99 for economy service on US orders under $99. We cannot combine shipping on multiple orders. We can combine multiple items if you use the shopping cart. You will also receive free shipping on all orders over $99 with a discount applied in the eBay shopping cart (applies to contiguous US orders only). We ship out of our two warehouses in the United States located in Illinois and California. We will ship your order from the closest warehouse with inventory. Shipping times may vary based on shipping location. Hawaii orders will take 30-45 days for economy shipping. ORM-D and Lithium / Li-Po Battery Restrictions ORM-D items can only be shipped via ground delivery. Products of this nature include quarts of fuel, glues, paints, thinners, aerosol sprays, and certain lithium batteries. We cannot ship ORM-D items to Alaska, Hawaii, Puerto Rico, or other US Protectorates. Other restrictions may apply based on APO/FPO shipping rules. Payment We accept all major credit cards, PayPal, and Google Pay. Taxes may be applicable at checkout. Learn More Returns Returned merchandise must be in unused condition and in its original packaging. The mounting of engines and accessories, running fuel through engines, cutting or pushing out the balsa sheets in kits, and other similar actions constitutes used merchandise. Radios must be returned with unmounted servos and switch harness. Flammable or combustible materials or products (regardless of whether the item is open or unopened) such as: Nitro engines (if fuel has entered the engine), Nitro fuel, Unopened as well as opened, charged and / or used Lithium Ion / Polymer (LiPo) batteries and other Lithium-based batteries. Any type of opened, charged and / or used battery including LiPo, Nickel-Metal Hydride (NiMH), Nickel-Cadmium (NiCd), other Nickel-based batteries and / or Alkaline-based batteries. Sealed Lead Acid batteries. Paints, thinners, certain glues or cements/pastes. Aerosols or compressed gas canisters. Rockets, kits containing rockets with or without igniters, igniters, hobby fuel (both quart or gallon). When packing your order for return, please be sure all the original packing material and instruction papers and/or manuals are included. We will be unable to process your return if parts are missing, or if items are not packed properly to avoid damage to products and their boxes and/or packages. ARF kits are specially packaged to insure safe shipping of all contents. In order to receive credit for a returned ARF, the contents must be returned in the original plastic covers and arranged in a manner that will not damage the contents or packaging. Please contact us for a return authorization number by opening a return case on Ebay. Freight charges will not be refunded. The customer is responsible for insured shipping back to our shop. Returns sent COD will not be accepted. Omni Models reserves the right to charge a 15% restocking fee on any merchandise returned for credit. About Omni Models We are the home for all your hobby needs. Our FREE shipping and combined shipping discounts save you money. We offer FREE ground shipping on US orders of $25.00 or more! Only $3.99 or $9.99 for ground service on US orders under $25.00. We also offer expedited shipping and we ship internationally. At Omni Models, we help people have fun with hobbies. Providing an exceptional customer experience is a mission we take seriously. That’s why, when it comes to radio control fun, we don’t mess around. Please contact us through your original purchase on eBay. We’re always striving to answer e-mails as quickly as possible.

Frequently Asked Questions About Hangar 9 UltraCote Lite Transparent White HANU965 Airplane Covering in My Website

www.amea-care.gr is the best online shopping platform where you can buy Hangar 9 UltraCote Lite Transparent White HANU965 Airplane Covering from renowned brand(s). www.amea-care.gr delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Hangar 9 UltraCote Lite Transparent White HANU965 Airplane Covering on www.amea-care.gr?

www.amea-care.gr helps you to shop online and delivers Fila to your doorstep. The best-selling Fila on www.amea-care.gr are: Fila Vf9240 Col 0700 Shiny Black Rectangle Eyeglasses Frames 55-14-140 Fila Womens Memory Foam Sneakers Pink Blue Gray White Size 9.5 FILA MB Mens Basketball Shoes Size 11 Egret Gray Blue Yellow Jamal Mashburn Fila Original Fitness Shoes Mens Sz 13 Blue White Red Low Top Sneakers Fila Doublewide Solid Wristbands FILA Axilus 2.5 Energized Purple Tie Dye Tennis Shoes – Womens S 9.5 MSRP – $115 Fila All Terrain Black Men’s Athletic Shoes – 1JM01275-016 Size 10.5 Women’s Fila Disruptor II Premium White/Navy/Red 5FM00002-125 FILA Men’s TERATACH 600 MID Size 10.5 White /Gardenia/ Gum Patent Leather FILA A-High Triple Black Faux Leather Shoes Men Sneakers Fila Forlani Outline Flag Womens White Motorsport Inspired Sneakers Shoes Fila Disruptor Ii Midnight Garden Womens Shoes Fila OakMont TR Trainers 1JM01747-704 Men’s Size 7 NEW without box Fila Men’s Mid-Cut A-High Athletic Sneakers 1CM00540-600 Red Size 13M Fila Grant Hill 2 Sneakers for Men – WhiteBlack -Size 45 FILA MB Mens Basketball Shoes Size 10 Beige Black Orange Blue Jamal Mashburn FILA MB Mens Athletic Basketball Shoes Size 11.5 Black Red Bred Jamal Mashburn Fila Men’s F13 PS Shoes Suede Gray Size 10 Fila Ray Tracer TR 2 Mid Shoes – NEW Mens Size 12 Black / Black – #44881-TOP Men’s T-Shirt-FILA Stacked Logos Retro Sporty Style-100% Cotton-Size S_M_L Fila Grant Hill 3 Woven Mens Shoes Fila Women’s Disruptor II Premium Athletic Sneakers Size 10 FILA BOOTS BLACK MENS ZIP CHASTIZER 1LM00116-001 Fila Volley Zone Pickleball Mens Black Sneakers Athletic Shoes 1PM00596-016 Fila Morales Men’s Size 11 Shoes Black Canvas Low Top Sneakers 1CM01544-013 Men FILA Renno Red Suede White Blue RETRO EDITION Running Lace Up Sneakers 10 Fila Ray TRACER mens Size 11 Athletic Shoes New Fila Disruptor II Animal Women’s Size 7.5 Athletic Fashion Shoes 5XM00806-992 Fila Fazal Basketball Shoes Size 10 M Fila Men’s Black Stackhouse Spaghetti Basketball Sneakers 1BM01871 Mens Fila Original Fitness Classic Retro Casual Athletic Shoes White Navy Red NEW FILA Motorsport Exalade 6 Women’s Black Athletic Shoes Sneakers Size 6.5 FILA Disruptor 2 Premium , Women’s 6, Chunky Leather Sneakers, 100 Triple White Fila Original Fitness Men’s Shoes Black-White 1FM01722-021 Fila Axilus Lace Up Youth Boys Blue Sneakers Casual Shoes 3TM00597-430 Fila Men’s A-High Shoes Sneakers 1CM00540-100 – White/White Fila Suspence Winspeed Athletic Running Shoes Grey Pink Size 7.5 New Size 6Y / Women’s 7.5 FILA F-13 Weather Tech Boots 3SH40121-060 CastleRock Fila Womens 5CM00772-125 White Casual Shoes Sneakers Size 11 Fila Men’s Disruptor II Premium Shoes White/Navy/Red 1FM00139-125 Fila Men’s Black Trazorus 2 Energized Sneaker Shoe Walking Athletic Gym NEW! Fila Impress LL Yellow Athletic Shoe Men 10 FILA Fila Stack 2 MSS23004109 White Blue Silver Fila All Terrain Black Men’s Athletic Shoes – 1SHW0262-002 – Size 11.5 FILA ORIGINAL FITNESS Shoes Women’s US 6.5 EU 37.5 Canary Yellow 5FM00631-732 FILA Womens Sneakers SORE 2 Running Training ATHLETIC Shoes SIZE 9.5 Grey Fila Mb Stitch Mens Shoes NIB – FILA – Women’s Sleek Marble Slide Sandals, Pink & White, 8 Men’s FILA A-Low Classic Casual Comfy Shoe / Triple White / 1CM00551 100 Fila black sneakers memory foam size 9 Men’s Fila Sneakers/Shoes High Top Black Size 12 Basketball Lace up/Hook & Loop Fila Renno X Dragon Ball Super Vegeta Sneakers Fila Heritage Tormo Platform Pink Women’s Shoes Size 7 Sample New Without Box Fila Disruptor II Wedge 5CM01842-014 Womens Black Lifestyle Sneakers Shoes Fila Vulc 13 Marble Mens Shoes Size 8.5 : White/Metallic Gold/White Fila Red Crimson Skyweave Men’s Sneaker, #1CM00356-600, Size 9 Fila Armada Mens Shoes FILA Women’s Disruptor II Premium Pale Banana Sneakers Fila Breakaway 10 Mens Shoes Fila Women’s Renno Sneakers Lemon/Knockout/ Pink Black 5CM01616-710 Size 7.5 M Fila Disruptor II Checker Womens Shoes Size 9 Black/White Checkered Men’s Fila, Chastizer Work Boot 1LM00984-001 Solid Black Leather Mesh Synthetic Fila Men’s Oakmont Tr [1JM01565-865] Sneaker Shoes, 11 M US Fila Oakmont TR Mid Men’s Shoes Ponderosa-Espresso-Black 1JM01276-362 FILA Sneakers Women’s 8 Purple Memory Foam Cool Max Athletic Running Shoes Fila Lombardi Mint Sneakers 10 Women Lace Up Low Top Running Shoes 5RM00366-421 FILA Blue/white Running Athletic Shoes Womens Size 9 1/2 Fila Edgewater 12 PB 1HM00872-467 Mens Blue Synthetic Casual Dress Boots Fila Disruptor II Wedge 5CM01842-013 Womens Black Lifestyle Sneakers Shoes Fila Sandenal Men’s – 1RM02203-117 Fila Sandenal Men’s Shoes Seedpearl-Oxford Tan-Black 1RM01646-201 FILA RAY TRACER TR 2 Sneakers DSMT/BTRR/LEMO -248 New Women’s Sz 5.5 Pink Fila Disruptor 2 Sneakers Premium Shoes Running Mens Fila Grant Hill 2 25th Anniversary Basketball Shoe / Black / 1BM01374 / NEW FILA Mens Size 6.5 Electrove 2 Chunky Sneaker Shoes Orange Black Street FILA Women’s Disruptor II Premium Silver Sneakers Fila Forlani Outline Flag Mens White Motorsport Inspired Sneakers Shoes Fila Windshift 15 Womens Shoes Fila Memory Stir Up 3 size 7 gray/mint women’s running shoes NEW 5RM02131-253 Men Fila Sneakers Navy Blue White Red Size 8 Fila Mens Superstride 4 1RM01889-001 Black Lace Up Sneaker Shoes Size 9.5 Fila Men’s Skele-Toes EZ-SLIDE Barefoot Summer Water Shoes Black Outdoor 8 Med Fila Faux Suede Hightop Sneakers Shoes Athletic Mens Size 9 Black FW00420-003 Fila Mens 1SC60526-030 Black Basketball Shoes Sneakers Size 12 Fila Armada Mens Shoes Fila 1CM01569-019 Fila Renno N Generation Men’s Size 10.5 Black Gray Orange Men’s FILA Renno Sneakers, Pre-Owned, 10 1/2, Minimal Wear, EUC Fila Stackhouse Spaghetti Men’s Shoes Black-Pinecone-Purple 1BM01269-972 Women’s FILA No Show Socks [1BM01873-125] NEW MEN’S FILA STACKHOUSE SPAGHETTI WHITE FILA NAVY FILA RED FM80 FILA~NWOB!!~BLACK LEATHER LACE-UP SLIP RESISTANT MEMORY FOAM SNEAKERS WOM: 11W Men’s Size 9 FILA Oakmont TR S/N 1JM01565-865 Fila Speedserve Energized Tennis Mens White Sneakers Athletic Shoes 1TM01778-10 [1BM00866-125] Mens Fila GRANT HILL 2 [1BM01788-014] Mens Fila STACKHOUSE SPAGHETTI Mens 8.5 – Fila Fast Trek Trail 1JM01662-055 Gray Synthetic Running Hiking Shoes Fila Mens Vulc 13 1SC60526-125 White Basketball Shoes Sneakers Size 8 Fila Corda Lace Up Mens Black Sneakers Casual Shoes 1TM01797-001 Mens FILA Teratach 600 Casual Athletic Work Shoe/ Black Red White / 1BM00872 014 Men’s Fila Original Fitness Casual Shoe 11-F16LT-150 New In Box Size 10.5 Mens Pullover Fleece Hoodie